-
-
1 × $560.00 -
1 × $3,704.00 -
-
1 × $3,931.00 -
2 × $2,724.00 -
-
-
-
2 × $754.00 -
2 × $608.00 -
1 × $2,184.00 -
1 × $951.00 -
-
-
-
-
-
-
1 × $1,003.00 -
1 × $7,392.00 -
1 × $388.00 -
1 × $561.00
-
-
-
-
-
-
1 × $3,012.00 -
1 × $2,847.00 -
1 × $2,361.00 -
1 × $481.00 -
-
1 × $788.00
-
-
1 × $581.00
-
1 × $1,106.00 -
-
1 × $1,068.00 -
-
-
-
-
-
1 × $1,642.00 -
1 × $471.00 -
-
1 × $497.00 -
-
1 × $657.00 -
-
1 × $2,390.00 -
-
2 × $573.00 -
-
-
-
-
-
1 × $1,057.00 -
-
Roll over image to zoom in
The new Pro-Dent CT mk II phantom is a versatile quality control tool of dental Cone-Beam CT, Dental Volume Tomography (DVT) and other 3D imaging devices according to the Radiation Protection Report no 172 by SEDENTEXCT.
The phantom consists of a main PMMA cylinder that houses modules with different test objects. Thanks to this design, you can perform tests with devices with a small FOV at different positions in the 160mm phantom.
Features and Benefits
- Noise / Uniformity Section: Uniform PMMA part of the phantom
- Geometric Distortion Section: An array of 2.0 mm diameter, 3.0 mm long holes uniformly pitched at 10.0 mm intervals
- Slice Geometry Section: 20mm thick module with two pairs of aluminum ramps and empty rods in vertexes of a square for detailed evaluation of slice thickness and geometry and laser position verification.
- 5 layer modules section with modules containing
- Linear Spread Function (LSF) PTFE / PMMA interface
- Point Spread Function (PSF) – 0.25 mm tungsten steel wire in air
- XY high contrast resolution (aluminum/polymer) – 1.0, 1.7, 2.0, 2.5, 2.8, 4.0, 5.0 LP/mm
- Z high contrast resolution (aluminum/polymer) – 1.0, 1.7, 2.0, 2.5, 2.8, 4.0, 5.0 LP/mm
- 6 low-contrast groups of 1.0, 2.0, 3.0, 4.0, 5.0, 6.0 mm rods made of: aluminum, PTFE, POM-C (delrin), PE-300, air and water emulating epoxy, background made of PMMA
- 10 mm rods made of aluminum, PTFE, POM-C (delrin), PE-300, air and water emulating epoxy suspended in PMMA – pixel intensity / HU values samples
- Stacked 20mm diameter contrast-to-noise discs made of aluminum, PTFE, POM-C (delrin), PE-300 and air suspended in PMMA
- Three 5.0 mm diameter titanium rods embedded in PMMA – beam hardening artefacts
- Positioning aids on the outside surface of the phantom
- Test stand with spirit level for accurate placing of the phantom in the test position
- Folding base for test stand positioning on the X-ray unit’s chair
- Convenient, portable case for storing and transporting the phantom
- Optional additional homogeneity disc available
Warranty Information
- 1-Year Warranty
