Infinium CLEO Capnography & SpO2 Monitor

The CLEO Capnography and SpO2 monitor is an intuitive approach to patient End-Tidal CO2 and SpO2.



Features and Benefits

• 5′ Touch Screen making the CLEO easy and intuitive for any user
• Portable and light weight design
• Long life lithium ion battery
• Suited for bedside and mobile spot check use.
• Respiration and pleth waveform
• The CO2 uses a 50/ml per minute sidestream method to deliver the most accurate EtCO2 readings
• Used on both intubated and non-intubated patients
• The sample line connection system uses filter cells to eliminate the potential of cross contamination
• Included SpO2 measurement

Note: The CLEO Data Manager Software is available to download.



Materials Included

• CLEO Pulse Oximeter
• (1) Sample Line
• (1) Power Cord
• (1) Adult Finger Sensor
• (1) Sensor Cable
• User Manual

Note: The CLEO Data Manager Software is available to download.



Technical Specifications

• Application: Neonatal, Pediatric and Adult Patients
• Weight: 2.5 lbs
• Dimensions
  • Height: 8′
  • Width: 4.5′
  • Depth: 4′
• Display: 5.0′ Diagonal Color TFT
• Resolution: 800 x 3 (RGB) x 480
• Indicator:
  • Alarm Indicator
  • Power Indicator
  • Pulse Beep and Alarm Sound
  • Trend Time: 1 to 72 hours
• EtCO2
  • Mode of Sampling: Sidestream or Mainstream
  • Principle or Operation: Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts.
  • CO2 Measuring Range: 0 to 150 mmHg (0 to 19.7%, 0 to 20 kPa)
  • CO2 Calculation Method: BTPS (Body Temperature Pressure Saturated
  • CO2 Resolution:
    • 0.1 mmHg (0-69 mmHg)
    • 0.25 mmHg (70-150 mmHg)
  • CO2 Accuracy:
    • 0-40 mmHg ± 2 mmHg
    • 41-70 mmHg ± 5% of Reading
    • 71-100 mmHg ± 8% of Reading
    • 101-150 mmHg ± 10% of Reading
    • Above 80 breath per minute ± 12% of Reading
  • Sampling Rate: 100Hz
  • Respiration Rate: 1-150 bpm
  • Respiration Rate Accuracy: ± 1 Breath
  • Response Time: &lt, 3 seconds includes transport time and rise time
  • Inspired CO2 measurement range: 3 – 50 mmg
  • Standards: Meets performance standards of ISD/FDIS: 2157:2003 (E) ASTM F1456-01, IEC/COV 60601-2-55
• SpO2
  • ASpO2: Anti-Motion SpO2
  • SpO2 Range: 0 – 100%
  • SpO2 Accuracy:
    • ± 2% (70 – 100% non-motion)
    • ± 3% (70 – 100% motion)
  • Pulse Rate Range: 30 – 250 bpm
  • Pulse Rate Accuracy:
    • ± 2 bpm (non-motion)
    • ± 3 bpm (motion)
  • Alarm Upper-Lower Limit:
    • Upper Limit: 70 – 100%
    • Lower Limit: 70 – 100%
  • SpO2 Probe:
    • Red Light LED Wavelength:
      • 660nm ± 5nm
      • Infrared Light LED Wavelength: 940 ± 5nm
    • Standard: Meets performance standards of EN ISO 9919:2005
• Networking
  • Wired Networking:
    • Industry Standard: 802.1 b/g wired network
    • Frequency Range: 2.412 – 2.484 GHz
    • Connected Bedside Number: Up to 16 bedside monitors
  • Wireless Networking
    • Up to 100m indoors
    • Industry Standard 802.11 b/g wireless
    • Supports TCP/IP and UDP/IP Protocols
• Power
  • Source: External AC Power or Internal Battery
  • AC Power: 100 – 240 VAC, 50/60 Hz, 150VA
  • Battery: Built-in and Lithium Ion Recharge, 12.6v/5Ah
  • Charge Time: 8 Hours
  • Operating Time: 3 Hours
  • Fuse: 3.15A/250V
• Environmental Specifications
  • Temperature
    • Operating: 5 – 40 °C
    • Storage: -10 – 45 °C
  • Humidity Range:
    • Operating: 80 %
    • Storage: 80 %
• LCD Specifications
  • Display Type: TFT
  • Size: 5′ Inch Diagonal
  • Active Area: 152.4 (W) x 91.44 (H) mm
  • Dot Pitch: 0.0635 (W) x 0.1905 (H) mm
  • Display Mode: Normally, white, transmissive
  • Interface: Digital (TTL)
  • Surface Treatment: Anti-Glare
• Touchscreen
  • Type: Four-Wire Analog Resistive Touch Panel
  • Input Mode: Stylus Pen or finger
  • Connector: FPC
  • Voltage: 7VDC
  • Chattering: 10ms
  • Transparency: 80%
  • Surface Hardness: 3H
  • Durability-Surface Scratching: Write 100,000
  • Active Force: 80 gf
  • Knock Test: 1,000,000 times

Warranty Information

• 2-Year Warranty