The Cardioline ClickHolter Recorder is a portable ECG signal recorder (Holter) able to save data without the need for removable media. The data is rapidly and safely transferred to a Personal Computer for subsequent analysis, thanks to the USB connection interface. The technical solutions adopted ensure the maximum patient comfort – minimum size, low weight, reliable recording and the best working conditions for the operators: two different work modes “stand alone” and “interactive”-, dual recording quality control system, fast downloading of recordings, cancellation of the test-patient association risks.

Feature and Benefits

Easy patient preparation: check signal quality and activation of recording without need for external instruments.
Control all preparation and recording programming phases directly at PC.
3 lead recording in simultaneous mode for 24/48 hours.
Pace-maker impulse detection on a dedicated channel.
Dual recording start-up system.
Low weight and small size.
Powered by two 1.5 V AA alkaline batteries.
Suitable for recordings on for neonatal weighing less than 10 kg.
High signal resolution.

Materials Included

ClickHolter Recorder Unit
10-Lead Patient Cable
USB Cable
Belt Pouch
25 Electrodes
User Manual

Technical Specifications

ECG Channels: 3
Type of Recording: Continuous digital acquisition
Recording Medium: Internal flash memory
Memory Size: 64 MB
Patient Impedance Detection: Independent for each lead
Saturation Detection: Independent for each lead
Service Connector: USB cable
Resolution: 10 BITS, 11 microV/bit LSB
Frequency Response: 0.05 – 55 Hz
Dynamic AC: 10mVpp
Dynamic DC: ±300 mV DC signal superposition
CMRR: &gt,60dB
Sampling Frequency: 250 Hz per channel for 24 hours or 125 Hz per channel for 48 hours
Input Impedance: &gt,10 Mohm
Patient Cable: 5 wires, 7 wires optional
Event Marker: Through keyboard
Data Transfer: Through USB cable
ECG Display: In real time 3 channels on PC monitor
Power Supply: 2 x AA 1.5V batteries
Dimensions & Weight: 110x83x17 mm, 160 gr. (including batteries)